Loose Treadle Belt = Loose Upper Thread Tension?
#1
![Default](/images/icons/icon1.gif)
Hi All, I have a question for all you experts on vintage machines. I've only had Ernestine for about 6 weeks or so and am still learning, though the learning curve has flattened quite a bit. My question is, does a loose treadle belt make for loose upper thread tension? In my mind it would. I've had to up the tension to get a good stitch and think it is too tight. Today I was using the machine and noticed the belt slipping a lot. We pre-stretched it before installing it, but have not adjusted it since.
Thanks.
Shari
Thanks.
Shari
#2
Senior Member
Join Date: Sep 2010
Location: Walland TN
Posts: 388
![Default](/images/icons/icon1.gif)
An upper Tension assembly has no bearing on a treadle belt and visa versa. If your belt is slipping it needs to be tightened. Once a belt is installed, it could require tightening a couple to a few times, even if stretched beforehand. Room temperature can affect the belt. I demonstrated in an unheated cabin, opposite side of the cabin from the fireplace, by the second night, I felt the belt slipping.
I hope you get your machine running the way you want.
I hope you get your machine running the way you want.
#3
![Default](/images/icons/icon1.gif)
Thank you for your help. I do know the belt does need to be adjusted. I can tell by how easy it is to slide off the treadle wheel when I want to put the machine away or oil underneath.
Shari
Shari