motor for a pink atlas
#12
Super Member
Join Date: Feb 2012
Posts: 8,091
![Default](/images/icons/icon1.gif)
If your machine has a cord block and you have a volt meter you can stick the probes of the meter in the motor outlet and then try it fully powered up. Doing it that way you can see just how much voltage the motor is getting and also watch for a smooth even voltage increase as you push down on the pedal.
Just a couple ways to do it.
Joe
#13
Super Member
Join Date: Jan 2011
Location: Sierra Vista, AZ
Posts: 3,992
![Default](/images/icons/icon1.gif)
Black replacement motor + sandpaper + painters tape +pink spray paint + time and effort = a pink motor.
I'd try to fix the original (if there) first.
I have also run across sources for white colored motors and even non painted motors. But alas those links are in my dead hard drive.
Joe
I'd try to fix the original (if there) first.
I have also run across sources for white colored motors and even non painted motors. But alas those links are in my dead hard drive.
Joe
#16
Super Member
Join Date: Feb 2012
Posts: 8,091
![Default](/images/icons/icon1.gif)
As for getting fired up to do things I've been putting off, I need more charcoal brickets and lighter fluid. LOL.
Seriously I have so many projects in queue my head is spinning.
Joe
#17
Senior Member
Join Date: May 2012
Posts: 911
![Default](/images/icons/icon1.gif)
these ohm.volt meters he talks about are comonly know as multi meters any auto parts , seasr harbor frieght, home depot, lowes.. so on carry them 20 will get you a basic model 35 for a top line,,,
for changing motor color and to keep the og color, can just just change the guts to the pink housing ?
for changing motor color and to keep the og color, can just just change the guts to the pink housing ?
#18
Senior Member
Join Date: Apr 2012
Location: Illinois...near St. Louis
Posts: 392
![Default](/images/icons/icon1.gif)
i was just thinking if i could find another motor it couldnt hurt to have a spare lying around, lol. I am realtively new to this stuff, but i am loving that i can take an older machine apart and clean it and make it work better (i am not mechanically inclined at all!!!)
I got the machine for $8 and its pretty rough but its a challenge. It was frozen up completely and i have gotten as far as getting all the parts to move smoothly by the handwheel but the darn belt keeps slipping when the motor is running. Ughhh. I just had to walk away. On to my other project which is a sewmor and i think the feed dogs are not moving back and forth correctly only up and down. Anyway... thats a different story for a different day. Thanks everyone for your suggestions and help!
I got the machine for $8 and its pretty rough but its a challenge. It was frozen up completely and i have gotten as far as getting all the parts to move smoothly by the handwheel but the darn belt keeps slipping when the motor is running. Ughhh. I just had to walk away. On to my other project which is a sewmor and i think the feed dogs are not moving back and forth correctly only up and down. Anyway... thats a different story for a different day. Thanks everyone for your suggestions and help!
#20
Junior Member
Join Date: Jun 2011
Posts: 243
![Default](/images/icons/icon1.gif)
Sorry, don't have a suggestion for your machine. But, my mom bought a pink Atlas in the early 50's, in fact, I learned to sew on that machine. Takes me back to a happy time in my life and yes, that machine is still running strong. I got it after mom died.
Thread
Thread Starter
Forum
Replies
Last Post
Botanicat
For Vintage & Antique Machine Enthusiasts
3
05-08-2017 05:03 PM
Caroline S
For Vintage & Antique Machine Enthusiasts
7
04-02-2013 06:33 AM