new baby= new questions!
#1
new baby= new questions!
today I bought(off CL) a 128 la Vencedora. It has a motor with the knee pedal, beautiful decals, destroyed wiring... so should I repair the motor and wires, and keep it electric? or should I convert it to hand-crank? and if I convert it, will one of my 66's hand cranks work? sorry about the crappy cell-phone pics.
It runs smoothly but is not gliding, if you know what I mean. Per the seller has been in storage for 15 years at least. Serial number puts it just before the depression- April 1929. So I will of course be lubing, oiling, and learning all about long bobbins. Any other advice? how do you open the side compartment?
It runs smoothly but is not gliding, if you know what I mean. Per the seller has been in storage for 15 years at least. Serial number puts it just before the depression- April 1929. So I will of course be lubing, oiling, and learning all about long bobbins. Any other advice? how do you open the side compartment?
#3
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
My best advice is to go on Muv's blog and read everything - also she has videos on the sticky
I had to tap one of the slide plates off on one of mine. Then I cleaned it real good and oiled it a little. It was full of lint. I used a hammer but I was pounding on an old wooden spool. Not real hard - tap tap tap.
Once you get it working you will love it. I use a HC on one I have from sew-classic so your HC should work - try it anyway - as long as you have the motor mount on the machine you can do it.
I had to tap one of the slide plates off on one of mine. Then I cleaned it real good and oiled it a little. It was full of lint. I used a hammer but I was pounding on an old wooden spool. Not real hard - tap tap tap.
Once you get it working you will love it. I use a HC on one I have from sew-classic so your HC should work - try it anyway - as long as you have the motor mount on the machine you can do it.
#6
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
#8
Super Member
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
Hi,
Your 66 hand crank will work nicely. Originally, your 128 was kneebar operated so the side compartment probably only contains the controller. You can tell by the hole in the side of case. The controller can be removed to create an empty compartment though. I'm all for converting the 3/4 sized Singer with shot wiring into handcranks as it seems there more needed/ useful like this than as another electric sewing machine. (IMHO)
Jon
Your 66 hand crank will work nicely. Originally, your 128 was kneebar operated so the side compartment probably only contains the controller. You can tell by the hole in the side of case. The controller can be removed to create an empty compartment though. I'm all for converting the 3/4 sized Singer with shot wiring into handcranks as it seems there more needed/ useful like this than as another electric sewing machine. (IMHO)
Jon
#10
Well I just turned pea-green! LOL! I've been searching for this machine with these decals for a long time. I think that the lid should lift right out when you push the tabs aside.
The back slide plate slides backward and they're almost always very stiff.
http://shop.sew-classic.com can sell you a replacement motor, cords and foot control all wired up for about $25. I much prefer the modern electronic foot control - easier on your foot, smoother to control and get the machine going at a steady speed and they don't get hot when sewing long seams at less than wide-open speed.
Have a wonderful time with your new treasure! I'll bet her sister is still out there waiting for me to find her.
The back slide plate slides backward and they're almost always very stiff.
http://shop.sew-classic.com can sell you a replacement motor, cords and foot control all wired up for about $25. I much prefer the modern electronic foot control - easier on your foot, smoother to control and get the machine going at a steady speed and they don't get hot when sewing long seams at less than wide-open speed.
Have a wonderful time with your new treasure! I'll bet her sister is still out there waiting for me to find her.
Thread
Thread Starter
Forum
Replies
Last Post
IBQUILTIN
General Chit-Chat (non-quilting talk)
10
07-10-2015 09:59 AM