Thanks for the additional info. I've now got more info to tune those two pesky little 99Ks of mine.
Joe |
ArchaicArcane, Thank you for this very helpful article. I used it today to set up a $5 red eye in a matter of minutes. I tore everything apart, cleaned the parts in a sonic jewelry cleaner and reassembled. The first few tries the tension was not good so I adjusted the thread tension a few times and it was not doing much. I went in and got your article I printed out this morning, made a few adjustments on the screw and it now stitches so much better. Hopefully when I get a handcrank attached and the machine back into its case it will sew even better. Thanks again.
|
Originally Posted by J Miller
(Post 5398994)
Thanks for the additional info. I've now got more info to tune those two pesky little 99Ks of mine.
Joe Hey Joe, maybe you could tell me,.. why do these 99s seem to gather in pairs? I've seen a couple of people refer to the pair of 99s, etc. And of course, I have 2 here.
Originally Posted by coloradosky
(Post 5401504)
ArchaicArcane, Thank you for this very helpful article. I used it today to set up a $5 red eye in a matter of minutes. I tore everything apart, cleaned the parts in a sonic jewelry cleaner and reassembled. The first few tries the tension was not good so I adjusted the thread tension a few times and it was not doing much. I went in and got your article I printed out this morning, made a few adjustments on the screw and it now stitches so much better. Hopefully when I get a handcrank attached and the machine back into its case it will sew even better. Thanks again.
A jewellery cleaner,.. that's a heck of an idea! I will have to see if I can hunt one of those down. The DH will be thrilled to hear I have yet another thing to find and to put in the sewing room. :D |
Originally Posted by ArchaicArcane
(Post 5407221)
Hey Joe, maybe you could tell me,.. why do these 99s seem to gather in pairs? I've seen a couple of people refer to the pair of 99s, etc. And of course, I have 2 here.
|
ArchaicArcane,
I'm not sure why really other than both of the ones I have were in need of a lot of TLC. By rescuing them I saved at least one of them from being parted out. And by having one that was functional I was able to compare it to the other one and get him fixed too. About the only machine we don't have a mate for is my wife's Bernina Record 930. And she's keeping her eyes open for one of those too. Joe |
Originally Posted by Caroline S
(Post 5408285)
Uh I now have triplets instead of twins. Purchased a very pristine 99K yesterday. The ONLY thing she needs is oiling and dust removal. Will post pics later today.
Originally Posted by J Miller
(Post 5408315)
ArchaicArcane,
I'm not sure why really other than both of the ones I have were in need of a lot of TLC. By rescuing them I saved at least one of them from being parted out. And by having one that was functional I was able to compare it to the other one and get him fixed too. About the only machine we don't have a mate for is my wife's Bernina Record 930. And she's keeping her eyes open for one of those too. Joe That said, I keep itching to get rid of the doubles, and he says to me "but you put so much time and energy into each of them, isn't each of them special?" Yes, I've bonded with each one, but I think for me, that the enjoyment is in the rescue and the rehab. After that, I know that any of them can go to a good home and be appreciated. |
"I think for me, that the enjoyment is in the rescue and the rehab. After that, I know that any of them can go to a good home and be appreciated. "
I think I like what you just said. That's exactly how I feel. Kind of catch and release... |
I like the hunt and then the rehab too. But so far I haven't gotten to the point of adopting any of them out.
I do get attached to the ones I've really worked on, especially when all the work comes together and the machine works really nice. But there is a limited base for sewing machines in this area. This place is economically dead. It's too small with too few people as well, and most of them wouldn't know the hand wheel from a bobbin. I can count on one hand the sewing / quilting / repair shops here too. Very sad. Joe |
Originally Posted by J Miller
(Post 5410782)
I like the hunt and then the rehab too. But so far I haven't gotten to the point of adopting any of them out.
I do get attached to the ones I've really worked on, especially when all the work comes together and the machine works really nice. But there is a limited base for sewing machines in this area. This place is economically dead. It's too small with too few people as well, and most of them wouldn't know the hand wheel from a bobbin. I can count on one hand the sewing / quilting / repair shops here too. Very sad. Joe |
Originally Posted by miriam
(Post 5408962)
I think I like what you just said. That's exactly how I feel. Kind of catch and release...
Originally Posted by J Miller
(Post 5410782)
I like the hunt and then the rehab too. But so far I haven't gotten to the point of adopting any of them out.
I do get attached to the ones I've really worked on, especially when all the work comes together and the machine works really nice. But there is a limited base for sewing machines in this area. This place is economically dead. It's too small with too few people as well, and most of them wouldn't know the hand wheel from a bobbin. I can count on one hand the sewing / quilting / repair shops here too. Very sad. I had an opportunity to buy the shop that's closing (I had the inside scoop), but decided not to because I'm concerned that there's not going to be enough business to keep it afloat more than a few more years anyway. I've had people ask me "Do they even make sewing machines anymore"? And the people I've seen in class with me, oi! Don't know the difference between a machine needle and a hand needle, or how to turn corners. Those are the ones who -want- to learn. Then there's all of the ads in the local kijiji of the backs of the machines. The machine I picked up yesterday for free, the guy said they couldn't figure out how to use it after it was tuned up by one of the local shops, so they were giving it away. "Tension Problems" he said. I haven't sat down with it yet, I promised myself I'd actually sew last night instead. :D |
All times are GMT -8. The time now is 11:12 AM. |