Originally Posted by Quilt Mom
Originally Posted by miriam
http://cincinnati.craigslist.org/bfs/2606628777.html
Is anybody looking for the old taylor's machine. It is considered industrial. These are a very good machine. I bet if you treadled it you could move some stuff through. What a machine to FMQ with, if the feed dogs could be dropped/covered... All you experts, what do you know about this type of machine? Would it be the type that could be used for that? And the table - looks like it is at a height for standing??? Another question - I know nothing about industrial machines - Why are there electrical cords AND a treadle pedal? Is the pedal for a different use on this machine? Or is it just a giant foot control for the machine? |
Originally Posted by emmah
Originally Posted by Quilt Mom
Originally Posted by miriam
http://cincinnati.craigslist.org/bfs/2606628777.html
Is anybody looking for the old taylor's machine. It is considered industrial. These are a very good machine. I bet if you treadled it you could move some stuff through. What a machine to FMQ with, if the feed dogs could be dropped/covered... All you experts, what do you know about this type of machine? Would it be the type that could be used for that? And the table - looks like it is at a height for standing??? Another question - I know nothing about industrial machines - Why are there electrical cords AND a treadle pedal? Is the pedal for a different use on this machine? Or is it just a giant foot control for the machine? |
Originally Posted by pumpkinpatchquilter
Hello, I hope it's ok to just jump right in here with a few questions and pictures of my machine. Please forgive me if I'm "butting" in here.
I bought a Singer in a table a few years ago for $35 at an antique/garage sale. I have several old machines but am just now really starting to look into them and learn more about them. Hopefully I didn't over pay - I believe it is a Singer 15-91, and it sews fine. It sounds like it needs a little oil and I would love to refinish the cabinet. I have three little girls and would love for this to be their machine to learn on. I really want them to grow up with a little knowledge and some appreciation for new AND old sewing machines. I read another thread on here (I cannot remember by who, I've been reading for hours on end off and on for a few days now! Lol*) about someone who refinished the same model machine but in a Queen Ann cabinet...they used what appeared to be a stripper on it? I wrote down the product - Klean Kutter Refinisher...then they used Howard Restore A Finish. Would that be the suggested way to go about restoring this cabinet? Any other suggestions? I have never attempted anything like this in my LIFE! Also I have a Singer Sphynx Treadle that I cannot seem to find much information online about, if anyone can tell me anything about it. Other than finding on the Singer website that it was made pre-1900 because the serial number has no prefixes. I will try and take a few pictures of that one later on today...here are some pictures of the 15-91. Thank you all so much for all of the information you have shared here too, it's AMAZING! It is taking me a little bit of time to wade through it all, but it is SO VERY enjoyable. You all have me wanting to save any little sewing machine I find and try and bring it back to life! LOL* It all depends on how much work you want to get into to fix the cab...I think it was Dunster that used the Klean Kutter on her Queen Anne...it turned out beautiful, didn't it? :) If you go look at my blog (the second link, not the DJ link) I just did a Davis treadle cabinet that was in pretty bad shape. Glenn "talked" me through refinishing it by using simple denatured alcohol to remove the old shellac without taking off the old stain, I did use a wood stain to "brighten" the finish a bit and even it out (Provincial was the shade I used) and then I put new shellac on it, using instructions that Glenn shared with me. A lot of work, and messy....make sure you have gloves!! ;) A way to just "fix" scratches in the finish would be to use Howard's Restor-a-Finish following the directions on the can, and finish with a good wax...I like Howard's "Feed-n-Wax" with orange oil...just cuz I like the smell of it! :lol: ;) Have fun, and you have my respect for teaching your girls to use and respect these oldies!! :) |
Originally Posted by grammydar
Mirriam
What do you mean try oil? What oil? I looked at Billy's tute, you use kerosene! that just doesn't seem right. Doesn't it hurt the decals? My singers both have good decals, I don't want to remove them. That is the only thing that I'm worried about, the rest I think I can handle. Thanks for all you patience and advice. Darlene you can use kerosene - test first if you aren't too worried about finish you can buy rust remover. I have used Triflow and aluminum foil to clean out a rusty bobbin holder. You do not have to totally disassemble your machine and soak in kerosene to un-stick one. A lot of people use 3 in 1 oil - that stuff dries up into a very gummy mess. You need something that will dissolve it. What ever dissolves the 3 in 1 will dissolve your decals. Triflow may break up the gummy stuff - Test any solvent you try on a place that won't show. Muv has a really good video. |
Originally Posted by Quilt Mom
Originally Posted by miriam
http://cincinnati.craigslist.org/bfs/2606628777.html
Is anybody looking for the old taylor's machine. It is considered industrial. These are a very good machine. I bet if you treadled it you could move some stuff through. What a machine to FMQ with, if the feed dogs could be dropped/covered... All you experts, what do you know about this type of machine? Would it be the type that could be used for that? And the table - looks like it is at a height for standing??? Another question - I know nothing about industrial machines - Why are there electrical cords AND a treadle pedal? Is the pedal for a different use on this machine? Or is it just a giant foot control for the machine? |
Originally Posted by grammydar
Originally Posted by Lostn51
Originally Posted by grammydar
Mirriam
What do you mean try oil? What oil? I looked at Billy's tute, you use kerosene! that just doesn't seem right. Doesn't it hurt the decals? My singers both have good decals, I don't want to remove them. That is the only thing that I'm worried about, the rest I think I can handle. Thanks for all you patience and advice. Darlene Billy It looked to me like you set the machine in the tub and allowed the kerosene to run over the whole thing, not actually scrub with it. the Go Jo sounds better. I will keep working at this |
Originally Posted by pumpkinpatchquilter
Hello, I hope it's ok to just jump right in here with a few questions and pictures of my machine. Please forgive me if I'm "butting" in here.
I bought a Singer in a table a few years ago for $35 at an antique/garage sale. I have several old machines but am just now really starting to look into them and learn more about them. Hopefully I didn't over pay - I believe it is a Singer 15-91, and it sews fine. It sounds like it needs a little oil and I would love to refinish the cabinet. I have three little girls and would love for this to be their machine to learn on. I really want them to grow up with a little knowledge and some appreciation for new AND old sewing machines. I read another thread on here (I cannot remember by who, I've been reading for hours on end off and on for a few days now! Lol*) about someone who refinished the same model machine but in a Queen Ann cabinet...they used what appeared to be a stripper on it? I wrote down the product - Klean Kutter Refinisher...then they used Howard Restore A Finish. Would that be the suggested way to go about restoring this cabinet? Any other suggestions? I have never attempted anything like this in my LIFE! Also I have a Singer Sphynx Treadle that I cannot seem to find much information online about, if anyone can tell me anything about it. Other than finding on the Singer website that it was made pre-1900 because the serial number has no prefixes. I will try and take a few pictures of that one later on today...here are some pictures of the 15-91. Thank you all so much for all of the information you have shared here too, it's AMAZING! It is taking me a little bit of time to wade through it all, but it is SO VERY enjoyable. You all have me wanting to save any little sewing machine I find and try and bring it back to life! LOL* |
Originally Posted by miriam
Originally Posted by grammydar
Originally Posted by Lostn51
Originally Posted by grammydar
Mirriam
What do you mean try oil? What oil? I looked at Billy's tute, you use kerosene! that just doesn't seem right. Doesn't it hurt the decals? My singers both have good decals, I don't want to remove them. That is the only thing that I'm worried about, the rest I think I can handle. Thanks for all you patience and advice. Darlene Billy It looked to me like you set the machine in the tub and allowed the kerosene to run over the whole thing, not actually scrub with it. the Go Jo sounds better. I will keep working at this |
I only clean my machines with sewing oil. It takes some time and patience, but it works the best!
Follow MUV's tutorial only cleaning your machine. She did an excellent job. I don't use non pumice Go Jo since that once silvered and removed some decals on one of my machines. |
Will be keeping up with these posts.
|
All times are GMT -8. The time now is 07:19 AM. |