Originally Posted by miriam
319 will not accept a 66 bobbin or at least mine will not. It is a larger and flatter bobbin. I got 20 bobbins for 6.00 on ebay. And yes you change out the fashion disk.
Glenn That is a good question Miriam. I will be waiting for the reply too. Nancy |
Originally Posted by Lostn51
Yeah my wife and daughter are handling all of the logistics and we are doing this as a family project! I could not do it without them and honestly I am so ready to do something constructive again. Heck I am ready to take on more machines for people now! I am suspecting that in a month or less I will be finished with the back log if I do not have any issues health wise. As long as I have my family and all of their help I think I will not have to worry about much.
Billy Nancy |
Originally Posted by melinda1962
Ok I just did some research, which I should have done before I bought the 319 so I knew what I was getting into. According to what I just learned the 319 uses 206x13 needles, which are suppose to be still available and the same bobbins that are sold for the Riccar Rotary?
Candace where do you buy the needles, since these are smaller than a 15x1? Also, where do you get the bobbins and what are they? My smg called them L bobbins, and would have to order them. He sent a Pfaff one home for me to try, no luck, but works in the Pfaff I acquired since then. I have seen them on most of the online sites, as well as the needles. I ordered the needles from sewclassic. The eye of the needle is right at the tip. I also never even dreamed the 319w would take a different needle than 90% of the other Singers! Who'd of thought???? Now I am wondering why, when the majority of Singers all take a 15x1, Singer decided to make the 319w different? I have Davis, New Home, Wheeler and Wilson, Wilcox and Gibbs, and the Singer 9W (which is basically a Wheeler and Wilson) that I had to buy special needles for, but why did Singer decide to do that with one of their machines? Maybe that is one of the reasons the 319w was a bust after only being in production for 3 years! Are there any other Singers that take a special needle? All of my other Singers take a normal 15x1, even the very old Fiddlebase VS2 from 1889. Even my Rocketeer from 1961 takes a normal 15x1 needle and a class 66 bobbin. No wonder I put my foot in my mouth yesterday when I told Miriam a class 66!!!!! All my other Singers either take a class 66 or class 15 bobbin and a normal needle!!! Why was the 319w designed so differently? Nancy |
[quote=jlhmnj][quote=BoJangles]
Originally Posted by jlhmnj
Originally Posted by ndnchf
I looked all over the Franklin for a serial number and almost gave up. But then I slid open the shuttle access plate and there was the serial number. Someone mentioned that Davis made machines have a letter D preceding the number. This one does not have the letter D, so I'm still not sure who made it. Looking through the original manual gives no clue either.
http://www.ismacs.net/sears/sears.html Sort of confusing, though Jon Wow Jon, this is interesting! According to this article the Franklin was made for Sears by Domestic in 1911, which is not what I have read before! Well, we know for sure the Franklin that looks like a 27/127 clone with the elaborate decals was not made by White! The White Franklins are newer and don't have the decals or shape of a 27/127! So it appears those Franklins are both made by Domestic? Nancy That's my understanding of it. But then again, the old saying "I only know what I read in the newspaper" comes to mind. Jon Nancy |
Originally Posted by ndnchf
Originally Posted by BoJangles
Originally Posted by jlhmnj
Originally Posted by ndnchf
I looked all over the Franklin for a serial number and almost gave up. But then I slid open the shuttle access plate and there was the serial number. Someone mentioned that Davis made machines have a letter D preceding the number. This one does not have the letter D, so I'm still not sure who made it. Looking through the original manual gives no clue either.
http://www.ismacs.net/sears/sears.html Sort of confusing, though Jon Wow Jon, this is interesting! According to this article the Franklin was made for Sears by Domestic in 1911, which is not what I have read before! Well, we know for sure the Franklin that looks like a 27/127 clone with the elaborate decals was not made by White! The White Franklins are newer and don't have the decals or shape of a 27/127! So it appears those Franklins are both made by Domestic? Nancy Seems to me like a collection based on Sears machines or research on this subject would be really interesting and useful. I always did like shopping at Sears compared to the other box stores. Jon Jon |
Originally Posted by jan on 446
I have a 503A on layaway from a great Sew & Vac shop. Got a manual online but it says nothing about what bobbins it takes. From the picture in the manual, it is metal and has 4 holes.
Can you tell me what number it takes? Anything else I should know? I will find out Thurs. if there are any cams with it. Lots of feet though! Are the cams easily available? Thanks, Jan on 446 Nancy |
Originally Posted by jlhmnj
Here's an excellent reference for Domestic / Davis VF / Demorrest machines:http://www.kelsew.info/Domestic/dome...lsnolinks.html
Seems to me like a collection based on Sears machines or research on this subject would be really interesting and useful. I always did like shopping at Sears compared to the other box stores. Jon Thank you! Nancy |
Originally Posted by BoJangles
Originally Posted by jan on 446
I have a 503A on layaway from a great Sew & Vac shop. Got a manual online but it says nothing about what bobbins it takes. From the picture in the manual, it is metal and has 4 holes.
Can you tell me what number it takes? Anything else I should know? I will find out Thurs. if there are any cams with it. Lots of feet though! Are the cams easily available? Thanks, Jan on 446 Nancy |
Originally Posted by vintagemotif
Heehee They're addictive. Even my husband thinks that HC is UGLY. I find it amusing. It works! And can be painted over.
Cathy has it all! You are lucky that you live close enough to her. I enjoyed my two times spent at her house just looking in awe at her collection, even the junk stuff. Have fun with your 319! Looking forward to seeing your first project. Nancy |
Originally Posted by tropit
:-D Oh, geez...we're pathetic, aren't we? LOL! I'm guessing from your avitar that you also rescue horses like I do. ("Jeannie" and "Mr. Brown"...straight of the track and destined for the knackers.)
Well, as beautiful as your machine is, I think I would rather rescue a cast off cab, or treadle. I just want to "mother" it, give it some TLC and bring it in from the cold. Maybe I can get mine to look as nice as yours. ~ Cindy Nancy |
All times are GMT -8. The time now is 05:20 PM. |