Hancocks carry generic feet and bobbins that fit the featherweights. They also have the walking feet for them.
|
My sewing repairman said a generic low shank walking foot will work great on a featherweight.
|
I wouldn't risk using parts from one machine on another ... I sure wouldn't want to damage my machine!
|
I tried my walking foot that was bought for a Kenmore(Janome compatible) and it did not work...I am sure it is a low shank but still it wouldn't go...I tried it very gently and saw that it just didn't move right so I took it off...I a interested to see which ones work...
|
I have a walking foot made for a featherweight. I used it to put the binding on a quilt. It worked well. I felt like it was a
strain on the machine. I decided this might be one of those things that just because you can, maybe you shouldn't. |
Thanks everyone! You have convinced me that it's not worth the risk to try it. I'd rather protect the Featherweight than worry about the $20 or so dollars being a waste at this point.
|
I would be afraid to try it, you can buy a walking foot for you featherweight
|
Most walking feet that are generic low shank will work on the featherweights, be careful of those that come with other machines as they may be slightly different. For Miriam who put a high shank on a Singer slant 401 OUCH. The Singer slant needle machines are a breed unto themselves and NOTHING other than slant attachments will work on them!
|
Originally Posted by patdesign
(Post 4730468)
Most walking feet that are generic low shank will work on the featherweights, be careful of those that come with other machines as they may be slightly different. For Miriam who put a high shank on a Singer slant 401 OUCH. The Singer slant needle machines are a breed unto themselves and NOTHING other than slant attachments will work on them!
|
Originally Posted by miriam
(Post 4730711)
I learned a LOT with that Singer 401g machine... I learned that you do not use WD40, 3-in-1 oil or gun oil - it dries up like rubber cement. High shank feet to not fit slant shank machines - I tested that one out and had to re time the machine. I learned how to take apart the stitch selector and cam stack (3-in-1 really gummed up.) Then I learned that denatured alcohol would dissolve 3-in-1 oil anyway... gotta keep it off the paint. I learned how to clean up and overhaul the motor. I have learned how to change out a needle shaft and re-time. I learned that the German made Slant-o-matics will treadle. I didn't have a manual and didn't find one on line for a long time so I learned what combinations worked to change stitches by trial and error - mostly error - then I figure out all you really need to know is right on the lid - duh... I learned that you HAVE to keep the piece that goes back and forth by the needle bar and near the cam stack from gunking up - a lot of those machines come gummed up in those places. I learned that the 403 and the 503 are easier to use and do the same stuff. I learned that there are two kinds of buttonholers for those slant-o-matics - one that zigzags and one that moves the fabric back and forth. I learned that the feed dog cover that comes with the professional button holer doesn't work as well as the older one. I learned that you can wind the bobbin while you are sewing by putting a spool on the lower holder and running the bobbin as you sew - sweet... The 411 came with a part that goes around the throat plate so if you raise it you can FM. The 401G and the 411G can do chain stitches - I have yet to try. (Maybe one day when Iris comes over.)
|
All times are GMT -8. The time now is 08:18 AM. |