Ok....all I know is that when I plugged my machine into 3 different outlets nothing worked....not the light, not the peddle. It was dead for all intense and purposes. I had purchased it from some who told me I would have to put some money into it to get it working. My mothers old Singer took the long bulb and that is what showed up in the Singer manual for the 99K. All I know is that my machine now runs like a dream.
|
I got plenty of morning laughs out of this thread. All in all, I am so happy that, for whatever reason, your 99 is humming away. Call it serendipity, maybe.
|
I think people are afraid there may be something wrong with the wiring and are worried for you. Whatever, have a good sew and just keep an eye when you have it plugged in you don't smell smoke or something yucky.
|
Does your machine use the stock wiring or does it have the power cord with two outlets? Also, does the light stay bright or does it get brighter and dimmer as you work the controller? It's possible someone wired the light in series with the motor instead of splitting the power before the controller. Kind of like twinkle lights on a Christmas tree. When one dies the whole string goes out.
Rodney |
I'd suggest removing the light - and if it won't run - then SOMETHING IS WIRED WRONG. My husband recently works on a Featherweight that had the wiring messed up a bit. It ran fine, but you occasionally got a tingle from the bed of the machine. Not really safe, and had it shorted a bit more, it would have been more than a "tingle". That is why people are concerned here -
There are a lot of newer machines that are controlled through the light SWITCH, so if that is not "On" the motor will not run. However they will run just fine without a bulb - as the power is not running through the bulb, just the switch. |
I am waiting for 99K to be delivered which I bought sight unseen. It's funny this is the first thread I should come across on the 99k as it addresses an issue I read about last night on Facebook. It said use of these old machines is electrocution waiting to happen and I've been nervous ever since and wondering if I should have just not bought the machine. When it arrives I'll check for any visible wiring problems and use an instant cut out switch when I first turn it on.
I guess the sensible thing to do is to take it to a repairman for a service and complete checkover. |
The bulb from my 99k is round. I need a new one, 'cause it's dead, but the SM works just fine!
|
Originally Posted by Dalronix
(Post 7339137)
I guess the sensible thing to do is to take it to a repairman for a service and complete checkover.
Being in Australia, you are better off with a 240V machine. The higher voltage means lower current and therefore heating, so the wiring lasts significantly longer than our 110V friends' machines. Only one machine has ever needed a total re-wire: A 32VDC 222K featherweight (was sold new to outback QLD in the '50s). Again, lower voltage had accelerated its demise. |
All times are GMT -8. The time now is 08:58 AM. |