Problem with 328K foot pedal
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
Joanne,
The foot controller is a simple two wire resistance unit. There are both resistance and electronic controllers available for it.
However before you get to the controller let me ask this. When was the last time the machine was thoroughly cleaned and oiled? And make sure the motor belt is not too tight or loose.
As for the controller here is a couple blog entries about them:
Drat, those are two links I lost in the last computer crash. They were from ArchaicArcane's blog.
If you PM her I'm sure she can give you the links, or someone else who reads this might have them.
Also if the controller is the button type, you can disassemble it and clean the insides, making sure there is no corrosion or broken pieces in there. That also might help.
JArrrghhhhh, I'm sorry I couldn't be more help.
Joe
The foot controller is a simple two wire resistance unit. There are both resistance and electronic controllers available for it.
However before you get to the controller let me ask this. When was the last time the machine was thoroughly cleaned and oiled? And make sure the motor belt is not too tight or loose.
As for the controller here is a couple blog entries about them:
Drat, those are two links I lost in the last computer crash. They were from ArchaicArcane's blog.
If you PM her I'm sure she can give you the links, or someone else who reads this might have them.
Also if the controller is the button type, you can disassemble it and clean the insides, making sure there is no corrosion or broken pieces in there. That also might help.
JArrrghhhhh, I'm sorry I couldn't be more help.
Joe
#3
Senior Member
Thread Starter
Join Date: Dec 2010
Posts: 443
Joe,
Thanks for the quick response. I just bought this machine and it seems like it was well taken care of. I did oil it and was really clean on the inside. I will check the belt and also email ArchaicArcane's. Thanks again.
Joanne
Thanks for the quick response. I just bought this machine and it seems like it was well taken care of. I did oil it and was really clean on the inside. I will check the belt and also email ArchaicArcane's. Thanks again.
Joanne
#6
Senior Member
Thread Starter
Join Date: Dec 2010
Posts: 443
Morning Joe,
I googled ArchaicArcane and found her website that shows you how to take the foot pedal apart to tighten one of the screws. Hopefully I will get the courage to try this. Thanks again for your suggestion and will keep you updated.
Joanne
I googled ArchaicArcane and found her website that shows you how to take the foot pedal apart to tighten one of the screws. Hopefully I will get the courage to try this. Thanks again for your suggestion and will keep you updated.
Joanne
#7
Senior Member
Thread Starter
Join Date: Dec 2010
Posts: 443
Joe,
I fixed it. Inside the foot pedal the screws were loose and all I did was tighten them and it works perfect. I only paid $25.00 for this machine two days ago and has all the attachments.
Thanks again,
Joanne
I fixed it. Inside the foot pedal the screws were loose and all I did was tighten them and it works perfect. I only paid $25.00 for this machine two days ago and has all the attachments.
Thanks again,
Joanne
#10
Joanne, which screws did you tighten? I just want to check for safety.
The one that runs about 2/3 the length of the foot control and moves when you press the button is supposed to be loose. The rest should be tight. The long one I'm talking about is adjustment and if it's too tight it can cause a fire.
If you followed what was on my blog, you're fine though.
The one that runs about 2/3 the length of the foot control and moves when you press the button is supposed to be loose. The rest should be tight. The long one I'm talking about is adjustment and if it's too tight it can cause a fire.
If you followed what was on my blog, you're fine though.
Thread
Thread Starter
Forum
Replies
Last Post
Sarabela
For Vintage & Antique Machine Enthusiasts
9
11-29-2014 08:27 AM
joobee
For Vintage & Antique Machine Enthusiasts
9
04-07-2014 06:04 AM
Treasureit
Links and Resources
56
07-21-2013 07:33 AM