Go Back  Quiltingboard Forums >
  • Main
  • For Vintage & Antique Machine Enthusiasts
  • Singer 401A in a Mystery Cabinet >
  • Singer 401A in a Mystery Cabinet

  • Singer 401A in a Mystery Cabinet

    Thread Tools
     
    Old 08-17-2017, 09:40 AM
      #1  
    Member
    Thread Starter
     
    Join Date: Aug 2017
    Location: Cape Canaveral, FL
    Posts: 10
    Default Singer 401A in a Mystery Cabinet

    Hello,

    My wife and I recently purchased a lovely 401A at a Central Florida thrift store to replace a 1960s-era nylon gear machine that disintegrated in the middle of our tent camper makeover project. We are not sewing enthusiasts, per se, but have learned lots of from the Quilting Board for our last machine. The 401 had been frequently mentioned on this forum and others, so we were pleased to find one that seemed operational (motor came on, things moved), but had a layer of dust and grime from sitting out in a shed or garage for a while. There were many "mud dauber" (type of wasp) nests on the outside and the machine compartment.

    We removed the machine, and it rode in the passenger compartment of our truck while the dirty cabinet rode in the back. Upon getting it home, we began a quick cleaning, and the machine itself seemed relatively very clean inside....a bonus. My wife is currently oiling and greasing it with TriFlow.

    My post, however, is about trying to identify the beautiful cabinet this machine is in. When we saw it in the shop, it was quite large, didn't seem assembled correctly (it just hadn't been folded the right way) and was quite dirty on the surface. Because we live in a condo, we were hesitant to even take it with us. They said "as is" means we had to remove it, so home it went.

    We were really quite surprised at how nice the cabinet itself looks. After wiping down and removing the wasp nests, it simply gleams with mid-century charm. The mystery cabinet is a blonde wood / veneer combo with spindle legs, knee control, and a split personality. When fully extended, it's huge. Larger than a "card table" model...and perfect for my wife's quilting projects. When completely folded, it's just the size of small desk.

    Anyway, I have searched several times over the last couple of days, and can't find information on this cabinet. I'm stumped. It There is a maker's mark on the bottom of the cabinet, but it's blurred, and appears to have been smeared when originally done. It's looks kind of like a "NBSP and PNo400" in a circle.

    I've attached some pictures here, including a top-down shot of the machine as we opened it...so a "before" cleaning image. The two cabinet knobs are off on the drawer because there was a wasp nest covering them, and they are being cleaned. If anyone has any advice about how I could learn more about the cabinet, we'd sure appreciate it. I'm sort of fascinated by how hard it is to find other examples. Must be my OCD kicking in!

    Thanks in advance for any assistance the wise members the Quilting Board can provide.

    John


    [ATTACH=CONFIG]579054[/ATTACH]
    [ATTACH=CONFIG]579055[/ATTACH]
    [ATTACH=CONFIG]579057[/ATTACH]
    [ATTACH=CONFIG]579056[/ATTACH]
    [ATTACH=CONFIG]579058[/ATTACH]
    [ATTACH=CONFIG]579059[/ATTACH]
    [ATTACH=CONFIG]579060[/ATTACH]
    Attached Thumbnails 401a_front1.jpg   401a_front2.jpg   401a_front3.jpg   401a_top1.jpg   401a_front4.jpg  

    401a_back1.jpg   cabinet_stamp1.jpg  
    Johncn is offline  
    Old 08-17-2017, 10:07 AM
      #2  
    Super Member
     
    OurWorkbench's Avatar
     
    Join Date: Mar 2015
    Location: Denver, CO
    Posts: 4,305
    Default

    I think those are neat. If you look at post #23 here -> Singer 401/A you can find a description of it.

    Janey - Neat people never make the exciting discoveries I do.
    OurWorkbench is offline  
    Old 08-17-2017, 10:37 AM
      #3  
    Banned
     
    Join Date: Aug 2014
    Location: Victorian Sweatshop Forum
    Posts: 4,096
    Default

    Janey beat me to it. It's a school cabinet.

    Cari
    Cari-in-Oly is offline  
    Old 08-17-2017, 11:01 AM
      #4  
    Power Poster
     
    QuiltnNan's Avatar
     
    Join Date: Mar 2011
    Location: western NY formerly MN, FL, NC, SC
    Posts: 51,430
    Default

    what a lovely cabinet/table it came in
    QuiltnNan is offline  
    Old 08-17-2017, 02:01 PM
      #5  
    Power Poster
     
    Join Date: Nov 2009
    Location: Mableton, GA
    Posts: 11,254
    Default

    That is a fabulous cabinet! Nice machine too. I have one that took me a long time to unstick the cam stack.
    Stitchnripper is offline  
    Old 08-17-2017, 04:56 PM
      #6  
    Member
    Thread Starter
     
    Join Date: Aug 2017
    Location: Cape Canaveral, FL
    Posts: 10
    Default

    Thanks for all the quick replies. We were excited to learn that it is a Model 403 3-way Sewing Desk, but in a different color than the one mentioned above. Apparently, these were used by some schools for teaching sewing, and so served as both a work table and an instructional desk. The amount of collective wisdom in an active enthusiast's forum like is amazing, and far exceeds the brainpower of Google.

    Any additional info appreciated, and thanks to those who took the time to comment.

    Regards,

    john
    Johncn is offline  
    Old 08-18-2017, 03:37 AM
      #7  
    Super Member
     
    Join Date: Mar 2011
    Location: Maryland
    Posts: 2,603
    Default

    I really like that cabinet!
    QuiltMom2 is offline  
    Old 08-18-2017, 04:16 AM
      #8  
    Super Member
     
    Join Date: Feb 2014
    Location: Davenport, Iowa
    Posts: 3,840
    Default

    I know nothing about the cabinet except that I like it and wish I had it!! LOL
    lindaschipper is offline  
    Old 08-18-2017, 04:56 AM
      #9  
    Super Member
     
    OurWorkbench's Avatar
     
    Join Date: Mar 2015
    Location: Denver, CO
    Posts: 4,305
    Default

    Originally Posted by Johncn
    ... We were excited to learn that it is a Model 403 3-way Sewing Desk,...

    Any additional info appreciated, and thanks to those who took the time to comment.

    john
    Welcome, John.

    I think that in the post that I linked to, the numbers were transposed as according to Needlebar it is number 430. It looks like there are three pictures on Needlebar - the middle one is http://needlebar.org/cm/displayimage..._display_media

    When I did a search for Singer +"3-way Sewing Desk" I found a 1959 a copyright entry here
    Interesting though, it calls it "set 432"

    It sounds like you have read some of the vintage threads. There are a lot of similarities between the slant shank machines. One of the threads that I and others have referenced is this one

    Another good link for slant shank Singers is this one

    Did you get a manual with your machine? I personally didn't think the knobs for the decorative stitches was very intuitive. You can find a manual at http://www.singerco.com/support/instruction-manuals You don't put the "A" in the search box.

    Have fun with machine and cabinet. I like the cabinet, too. Mine doesn't look near as nice. Some day I need to take measurements for the runners underneath to see if I could find a tote to slide into.

    Janey - Neat people never make the exciting discoveries I do.
    OurWorkbench is offline  
    Old 08-18-2017, 06:00 AM
      #10  
    Member
    Thread Starter
     
    Join Date: Aug 2017
    Location: Cape Canaveral, FL
    Posts: 10
    Default

    Originally Posted by OurWorkbench
    Welcome, John.

    I think that in the post that I linked to, the numbers were transposed as according to Needlebar it is number 430. It looks like there are three pictures on Needlebar - the middle one is http://needlebar.org/cm/displayimage..._display_media
    Thanks, that is also helpful.

    It sounds like you have read some of the vintage threads. There are a lot of similarities between the slant shank machines.
    We are checking out the other links you included. The "accessories" were mostly missing for the 401A, but on the scale of things to complain about with a vintage machine, that is pretty much not an issue. The manual did not come with it, but we downloaded the user manual and the service manual from various searches. Hopefully will only need the former.

    Because my wife and I are both retired educators, it is certainly appropriate that the blonde cabinet we found is former school issue....lol.

    Really appreciate everyone's comments. This is a friendly forum compared to some I have used or moderated. I really like "forum format" better than the other more instantaneous "social media" tools. Forums allow for focused, sustained thought and discussion, and documentation of info and processes that help others over a longer period of time in ways that "new media's" immediately there / immediately POOF! formats don't. Forum threads become an archive of information. And this forum seems to have kept up with VBulletin updates and tools...well run IMHO.

    Regards,

    John
    Johncn is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    Wanabee Quiltin
    For Vintage & Antique Machine Enthusiasts
    4
    10-24-2015 07:01 AM
    miriam
    For Vintage & Antique Machine Enthusiasts
    154
    03-12-2014 07:43 AM
    Melissa25125
    For Vintage & Antique Machine Enthusiasts
    2
    11-01-2013 05:06 PM
    Gilla
    Main
    5
    04-18-2010 10:13 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is Off
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter