Singer 66 with blacked out chrome
#1
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Central Kentucky
Posts: 132
Singer 66 with blacked out chrome
I found a singer 66 at a thrift store. The needle plate and the stop motion screw on the hand wheel are both black rather than chrome. Has any one seen this before? The nose plate and the cover plate just above the motor are both chrome. The serial number dates it to December 17 1945 just after Pearl Harbor.
#2
Senior Member
Join Date: Jan 2015
Location: Wisconsin
Posts: 474
Yes. Singer manufactured some parts in "blackside," and older machines will vary in how much, if any, blackside parts were used. Attachments could also be all or partly blackside.
Some say the blackside was due to a shortage of certain metals during WW2. My 1951 128 crinkle finish is all blackside, except the foot. (No attachments.)
Some say the blackside was due to a shortage of certain metals during WW2. My 1951 128 crinkle finish is all blackside, except the foot. (No attachments.)
#3
Super Member
Join Date: Sep 2015
Posts: 1,963
I know there are a few odd black face plates and covers on some models. I have noticed it on machines made around WWII, and I think there are a few earlier and later examples too. I don't know the details, but some are particuarly looking for black side Featherweights and are willing to pay for it. I have seen dark presser feet and accessories, black iron oxide finish in stead of the shiny chromium. Early singers had nickle plated shiny parts, but some time after 1920 chromium became the standard. The general info on this is that Singer turned to alternatives when chome either became hard to get hold of or was seen as and unnecessary an excess in those days. I think it was a fancy too, since they turn up later when chrome was more accessable again. Here is a bit of related info on a 128.
Last edited by Mickey2; 11-25-2018 at 05:32 PM.
#5
Member
Join Date: Jun 2015
Location: High Point, NC
Posts: 88
BTW, WW2 for USA began 12-7-41 - not 1945. My mom (12 y.o. at the time) was with her family on the way to church that Sunday morning when they witnessed the beginning of the Pearl Harbor attack. My grandfather quickly returned home with the family and then went on to Hickam Field to command his shore artillery battery's defense of the airbase.
I think the wartime chromium shortage was due to its use in hardening the inside of gun and artillery piece barrels.
John Thomas in NC
I think the wartime chromium shortage was due to its use in hardening the inside of gun and artillery piece barrels.
John Thomas in NC
#8
Super Member
Join Date: Sep 2015
Posts: 1,963
My 201 is heavier than a 128, a Pfaff 30 and 130 are even heavier. I think part of the reason the old cast iron machines are favorites is because they are heavy, makes them very sturdy, smooth running and capable machines. They just aren't as portable as more light weight machines. My 201 came rather randomly and I kept it. A 66 is nice though, it runs lighter than my 201.
#10
Junior Member
Join Date: Jul 2018
Location: SW Pennsyltuckey
Posts: 111
I found a singer 66 at a thrift store. The needle plate and the stop motion screw on the hand wheel are both black rather than chrome. Has any one seen this before? The nose plate and the cover plate just above the motor are both chrome. The serial number dates it to December 17 1945 just after Pearl Harbor.
Attachments were sometimes all blackside, sometimes part blackslide. This includes some of the screwdrivers and 66 bobbins as well. I have a small collection going. =)
[ATTACH=CONFIG]604851[/ATTACH]
[ATTACH=CONFIG]604852[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
cmrenno
For Vintage & Antique Machine Enthusiasts
6
10-21-2012 12:12 PM
grocifer
General Chit-Chat (non-quilting talk)
1
07-28-2012 11:08 AM
CircleSquare
General Chit-Chat (non-quilting talk)
89
09-22-2011 07:55 PM
Country1
Main
67
05-10-2011 04:19 PM
Jan in VA
General Chit-Chat (non-quilting talk)
5
10-28-2010 01:33 AM