Treadling - one foot or two?
#21
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
Joe,
Be on the lookout for a set of irons from an industrial machine. A universal top on it with a household cut out and you are good to go. All of my regular treadles are in the 19" range inside leg to leg measurement and my industrial 31-20
measures in at 25 1/8". That extra 6 inches really helps for those who are horizontally challenged. VBG
Cathy
Be on the lookout for a set of irons from an industrial machine. A universal top on it with a household cut out and you are good to go. All of my regular treadles are in the 19" range inside leg to leg measurement and my industrial 31-20
measures in at 25 1/8". That extra 6 inches really helps for those who are horizontally challenged. VBG
Cathy
I usually use one, the left. I have spinal problems that makes my right side weaker and have less stamina than the left. I'm also fairly plump, picture the Pillsbury Dough Boy or the Michelin Man trying to get both fat legs under the table. So I use the left foot mostly. I do try to use both occasionally, but the left leg is dominant and the right leg fatigues faster, so the left is doing all the work anyway, so I just use one.
Joe
Joe
#23
Super Member
Join Date: Feb 2012
Posts: 8,091
Joe,
Be on the lookout for a set of irons from an industrial machine. A universal top on it with a household cut out and you are good to go. All of my regular treadles are in the 19" range inside leg to leg measurement and my industrial 31-20
measures in at 25 1/8". That extra 6 inches really helps for those who are horizontally challenged. VBG
Cathy
Be on the lookout for a set of irons from an industrial machine. A universal top on it with a household cut out and you are good to go. All of my regular treadles are in the 19" range inside leg to leg measurement and my industrial 31-20
measures in at 25 1/8". That extra 6 inches really helps for those who are horizontally challenged. VBG
Cathy
Thanks for the info. I've been on the lookout for something along those lines to make a MUT. But so far nothing has shown itself.
Joe
#25
Joe - I haven't checked it out myself but I think I read on the Treadleon website that the White cabinets are wider and position the needle directly in front of you instead of to the left of center.
#26
Super Member
Join Date: Feb 2012
Posts: 8,091
pCDH,
Another option to be sure.
Part of my "plan" for the MUT is to make interchangeable inserts for different machines. For instance I have a W&G Type 10 industrial lock stitch machine. To drive that I really need a treadle with a larger drive wheel. Basically an industrial treadle base.
Eventually I'll find one.
Joe
Another option to be sure.
Part of my "plan" for the MUT is to make interchangeable inserts for different machines. For instance I have a W&G Type 10 industrial lock stitch machine. To drive that I really need a treadle with a larger drive wheel. Basically an industrial treadle base.
Eventually I'll find one.
Joe
#27
That's interesting. I didn't realize you'd need a larger drive wheel for some machines. I'd be afraid that would make others substantially harder to treadle.
I'm trying to remember where I saw a 31-15 treadle setup for sale. It wasn't silly cheap but it did have that industrial treadle base and, of course, the machine is a tank!
I'm trying to remember where I saw a 31-15 treadle setup for sale. It wasn't silly cheap but it did have that industrial treadle base and, of course, the machine is a tank!
#28
Junior Member
Join Date: Jan 2012
Posts: 108
I have 2 feet on the platform. My right foot on the back right corner and my left toe on the left corner kitty corner from the right foot. Once I start it with my hand with the hand wheel, a light push with my right foot keeps it going and the toe taps the front to keep it in motion.
This is exactly how I treadle - I've never seen it done any other way
#29
I'm probably hampered by never having seen it done except in a couple of videos. The only treadling I've ever seen in person is a lathe which uses a different pivot point to put the majority of the motion at the front so it's done one legged with a pushing motion and knee flexion. For me it's completely natural to do it one footed - heel, toe, heel, toe, ..... No knee movement, just ankle flexion. I do intend to try to get the coordination of two feet into it at some point but each time I've tried so far it's been very herky-jerky.
#30
Super Member
Join Date: Feb 2012
Posts: 8,091
I was given my first treadle machine, Singer 66 T-1, back in 98. Prior to that nobody in my family had one they used. And I'd never seen one in use. So I had to learn to do it all by myself. I do not think there is any one right way to do it. It's one of those "what ever works for you" is the right way kind of things.
Joe
Joe
Thread
Thread Starter
Forum
Replies
Last Post
jeanharville
For Vintage & Antique Machine Enthusiasts
32
03-02-2012 03:15 PM
Mom3
For Vintage & Antique Machine Enthusiasts
19
02-23-2012 11:02 AM
Treadle_Boots
For Vintage & Antique Machine Enthusiasts
21
12-21-2011 07:03 AM