Viking Stitch Width Knob
#1
Super Member
Thread Starter
Join Date: Nov 2010
Location: Utah
Posts: 2,085
![Default](/images/icons/icon1.gif)
My neighbor has asked me to get her Viking knob un-stuck. I've tried everything I know of. When I asked my boss how these knobs come off, he said, "they don't.' The stitch width knob pulls out to engage the buttonhole system. We should be able to push the knob back in to engage the stitch width. I can pull it out and push it back in, but I can't turn the knob to get any stitch width. Here's a couple pictures --one with the knob pushed in and one with it pulled out. Plus a picture of the thread mess I got out of the handwheel. Any suggestions?
#2
![Default](/images/icons/icon1.gif)
There is an issue with the era vikings. They used the self lube stuff that was good for about 30 years, and then it hardens up. Only way to fix the problem is to carefully take it apart and clean ALL of the old stuff out. Don't try to force anything - it breaks very easily.
They are rather complicated machines, some of them require taking most of the machine apart to get at. There are some manuals out there, don't recall exactly where right now - but the main thing do NOT try to force anything, if it won't move easily and you try to move it, you will break something.
They are rather complicated machines, some of them require taking most of the machine apart to get at. There are some manuals out there, don't recall exactly where right now - but the main thing do NOT try to force anything, if it won't move easily and you try to move it, you will break something.
#4
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
![Default](/images/icons/icon1.gif)
When you have a stuck machine you have to clean and oil every little thing. The knob itself can be sruck but just as likely it can be stuck with dried oil anywhere along the path the knob would travel. SOB to find.
#5
Super Member
Join Date: Sep 2015
Posts: 1,963
![Default](/images/icons/icon1.gif)
A tricky one. How on earth did all that thread get in there? Repeated applications of spray can oil can dissolve and flush things out. Some of them literally seep upwards with just the slightest movement of the machine. Let us know how things are working out :- )
#8
Member
Join Date: Dec 2011
Posts: 2
![Default](/images/icons/icon1.gif)
Hi, I was given a viking from 1973/4 which had a stuck-in reverse button.
I found and joined a yahoo group for pre 1980 viking machines and asked for advice which was so helpful. I managed to loosen off the button and it now sews so well. I used a spray similar to WD40 but with a silicone ingredient which was recommended. I live in the UK and sourced my spray through a carparts shop. I downloaded a service manual from the yahoo group which I`ve got for future reference too. Hope this can help
I found and joined a yahoo group for pre 1980 viking machines and asked for advice which was so helpful. I managed to loosen off the button and it now sews so well. I used a spray similar to WD40 but with a silicone ingredient which was recommended. I live in the UK and sourced my spray through a carparts shop. I downloaded a service manual from the yahoo group which I`ve got for future reference too. Hope this can help
Thread
Thread Starter
Forum
Replies
Last Post
Beautiful_Sound
For Vintage & Antique Machine Enthusiasts
6
12-01-2015 11:07 AM
elomax
For Vintage & Antique Machine Enthusiasts
7
07-14-2015 08:30 AM
lostsoulhelpmejebus
For Vintage & Antique Machine Enthusiasts
4
02-13-2014 06:02 PM
nanna-up-north
For Vintage & Antique Machine Enthusiasts
26
04-08-2012 04:51 AM