Vintage Sewing Machine Shop.....Come on in and sit a spell
Member
Join Date: Mar 2012
Location: sf bay area, california
Posts: 93
American bottonhole overseaming and sewing machine co
Can someone tell me something about this machine? The earliest patented is Jul 26 1859 the latest 1867. The brass plate Manufactured By The American Bottonhole overseaming and sewing machine co. Philadelphia, Pa. I guess I have forgot how to post pictures. Can someone help me out? The machine is rough but if it is not worth saving the irons are great. The wooden pitent ? Rod is in good shape. Of course there is no cover and I think I can reglue the top. Any info please.
Can someone tell me something about this machine? The earliest patented is Jul 26 1859 the latest 1867. The brass plate Manufactured By The American Bottonhole overseaming and sewing machine co. Philadelphia, Pa. I guess I have forgot how to post pictures. Can someone help me out? The machine is rough but if it is not worth saving the irons are great. The wooden pitent ? Rod is in good shape. Of course there is no cover and I think I can reglue the top. Any info please.
http://www.sewmuse.co.uk/american%20...%20machine.htm
Re posting pictures, can't help because I don't know how to do it either. Good luck!
pat
Super Member
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
Posting Pictures
Hi,
I just recently figured out how to post a pic after much frustration. Here's what I do:
Reply
Go Advanced
Manage Attachments
Choose File
My Pictures, etc
I just recently figured out how to post a pic after much frustration. Here's what I do:
Reply
Go Advanced
Manage Attachments
Choose File
My Pictures, etc
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
I TOTALLY agree. Even if you put in a maximum bid that would probably go over the reserve, if other people don't bid it up, it never goes high enough to go over the reserve. Doesn't make sense to me.
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
Bennett, some 301's have their feed dog knob stuck. I had one machine that I had to work on for quite some time. You just need to Triflow it and keep at it and it will turn, eventually. You will have better control if you can get that knob turning and lower the feed dogs.
Yes, the thread cutter needs to be removed depending on which FMQ foot you use. A couple of my 301's are missing their thread cutter as I suspect someone removed it for FMQ and then never put it back. The FMQing foot is loud, I agree!
Yes, the thread cutter needs to be removed depending on which FMQ foot you use. A couple of my 301's are missing their thread cutter as I suspect someone removed it for FMQ and then never put it back. The FMQing foot is loud, I agree!
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
candaca. I would buy that in a heart beat
Fact I wish some of mine looked that good on the day they came home...... on one singer I did replace a piece of the top, it looked just like that one, THEN once getting more machines, The price of the veneer was out of the question. enough veneer the do the entire top is around $70 add this to about another $50 in other materails as glue lacquer, sand paper so on.... and a good 5 days worth of hard labor.... Thats if you have all the tooling...
so the last 7 have left with there ugly falling apart tops in place.. yet reglued, sanded smooth and lacquer...
I knew I was taking a chance doing this, these two were going to a lady friend who is a bit of a perfectist.. ok I gave her 4 treadles, 3 went to her with screwed up tops.....
she did make a funny look, ran her hand over the wood and fell in love with the look.....
I only have one pic showing what I do to the tops and the lighting wasn't good plus it's a bit blurry. I don't have any that show the area , before
Bobbin winder , I have 3 with the winder on the bottom and have never had an issuse using those. at times I do have to use a finger and push the winder against the belt, but then at times I end up doing the same on the round bobbin machines
all it takes is time and you have it
Fact I wish some of mine looked that good on the day they came home...... on one singer I did replace a piece of the top, it looked just like that one, THEN once getting more machines, The price of the veneer was out of the question. enough veneer the do the entire top is around $70 add this to about another $50 in other materails as glue lacquer, sand paper so on.... and a good 5 days worth of hard labor.... Thats if you have all the tooling...
so the last 7 have left with there ugly falling apart tops in place.. yet reglued, sanded smooth and lacquer...
I knew I was taking a chance doing this, these two were going to a lady friend who is a bit of a perfectist.. ok I gave her 4 treadles, 3 went to her with screwed up tops.....
she did make a funny look, ran her hand over the wood and fell in love with the look.....
I only have one pic showing what I do to the tops and the lighting wasn't good plus it's a bit blurry. I don't have any that show the area , before
Bobbin winder , I have 3 with the winder on the bottom and have never had an issuse using those. at times I do have to use a finger and push the winder against the belt, but then at times I end up doing the same on the round bobbin machines
all it takes is time and you have it
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
A tip on posting pictures. Some cameras take the pictures at such high resolution that the file is way too big to post here. So, open the picture in Microsoft Picture Manager (or similar program), then resize the photo to Large E-Mail size (if that choice is given), and then save the picture at that size. You can then do what Jon said above....Go Advanced, Manage Attachments, Select File, Download. Then it will come up in your post.
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
So this is how far I've gotten on my cabinet to extension table project. Skip, do you see the two right hand pieces? they need to become one piece. Then I put little legs on to lift the machine, put the left hand extention on with it's hinges, and start relaxing that this project might work out. Laura
[ATTACH=CONFIG]341645[/ATTACH]
[ATTACH=CONFIG]341645[/ATTACH]
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
Candace- I think they are all worth our attention. I like a challenge. I frequently just remove splintered veneer like that, sand and stain with Minwax "fruitwood" and it looks a whole lot better. it doesn't prevent re-veneering at a later date, either. I'm sure that machine would teach you a lot, and it really is fun to rescue them. I've been catching and re-releasing treadles for a few years, now. I almost always have a sad little treadle around that I'm working on. Go for it! as for the machine itself, they are remarkably resilient.Laura
Joe[/QUOTE]
Joe[/QUOTE]
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Yes, I'm usually up for a project, but in this case, the machine is going for higher than I would pay for it. Someone wants it more than me. It's in a local auction. Nope, this one is likely going to end up being ripped apart for someone to make a coffee table out of it:< I can't save them all.
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
So this is how far I've gotten on my cabinet to extension table project. Skip, do you see the two right hand pieces? they need to become one piece. Then I put little legs on to lift the machine, put the left hand extention on with it's hinges, and start relaxing that this project might work out. Laura
[ATTACH=CONFIG]341645[/ATTACH]
[ATTACH=CONFIG]341645[/ATTACH]
Skip
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM