Vintage Sewing Machine Shop.....Come on in and sit a spell
#4211
Banned
Thread Starter
Join Date: Oct 2009
Location: Bikini Bottom
Posts: 5,652
Originally Posted by BoJangles
Ok, I won't worry about the Singer 9 W until you get the needles and try them out. Are you going to then sell needles to all of us that have the Singer 9W or the Wheeler /Wilson machines that take the 127X1 (Boyle #18). I really like to treadle on the Singer 9W -- it is very easy to use.
I could also order some needles, but I only want a few of the industrail needles -- don't need thousands!
Thanks Billy,
Nancy
I could also order some needles, but I only want a few of the industrail needles -- don't need thousands!
Thanks Billy,
Nancy
Billy
#4212
I know Miz Johnny the Singer 9W takes a 127X1 size needle. I can't find them, but Billy is trying out some industrial Schmetz needles that Charlee found information on that supposedly will work with the Wheeler/Wilson machines. This will be a great alternative to trying to find the vintage needles that are no longer in production for the 9W.
Nancy
Nancy
#4213
I have been very busy with my new old machines this week. I acquired a Husqvarna Viking Class 21 machine a little over a month ago. Through many different online connections I was able to locate the belts from a wonderful repair professional in Pennsylvania. Every place I looked for them with very few results and if I was lucky enough to find them they were over $50 plus shipping for the two odd-sized belts. I was referred to this kind man in PA through a pre-1980 Viking owners Yahoo group. He was so unbelievably kind. He took several days to respond to my email and felt so bad about the delay that he sent me both belts for free!!! So my DH and I oiled and buffed and poked around but could only get the machine to make a straight stitch. The timing was way off and the cam settings were out of alignment. I finally broke down and took a trip to our local SM repairman. I also brought him a copy of the service manual that I got online for this machine, stitch pattern charts for the cams as well as the manual. It took him quite a few tries and a good deal of time but I picked it up today and it is purring like a kitten and making some very pretty stitches. Now I am on a quest to find some extra cams. I have two "C" cams but am looking for A, B and any others that fit this series. So, just when I was almost ready to start playing I got a call from a lady who wanted to get rid of her sister's machine. I picked it up this evening. It is a New Home Light Running Type F with Serial No. NL 3525921, made in U.S.A. in Rockford, Ill. On the bottom of the head it is stamped ALB-201 and has a Westinghouse motor. DH has to rewire the motor since we had a little "accident" when we plugged it in. I think his fingers will be OK :) Does anyone know anything about these machines? It's just a plain, straight stitch model, kind of a brownish-green with no fancy decals, just the New Home nameplate and two circular seals. Is it worth a little time and effort to clean up and oil or is it just a boat anchor?
#4214
Originally Posted by Lostn51
Oh and here is another WTF?!?
eBay 250664918698
Billy
eBay 250664918698
Billy
#4215
Originally Posted by Candace
All right, there's been many treadles made into coffee tables etc. but this one is just "wrong".
http://sacramento.craigslist.org/atq/1883224678.html
And what a bargain, too. :thumbdown:
http://sacramento.craigslist.org/atq/1883224678.html
And what a bargain, too. :thumbdown:
http://akroncanton.craigslist.org/for/1879905799.html
#4216
Originally Posted by quilterguy27
What a total shame that someone would do that to a sewing table. Made me want to look in my neck of the woods. Look what I found. Don't laugh or cry too hard please.
http://akroncanton.craigslist.org/for/1879905799.html
http://akroncanton.craigslist.org/for/1879905799.html
I would not buy that but If I found one or one was given to me i know just where I would put it lol
Kinda sad to think that that singer had to give up its life for that :cry:
#4217
Here's one on the flip side of the coin. I think I'd snatch this one up in a heartbeat if I wanted another machine. Billy or anyone, what do you think of this machine? Worth the price or should I ask for better pics?
http://akroncanton.craigslist.org/atq/1851717549.html
OK, I'm on a roll now and I need to stop, but this one they are suggesting turning into a lamp or vase. It looks nice to me just the way it is and the price is right. What do you think?
http://akroncanton.craigslist.org/fuo/1843422775.html
OK, I'm going to stop now and go to bed. Nite all.
http://akroncanton.craigslist.org/atq/1851717549.html
OK, I'm on a roll now and I need to stop, but this one they are suggesting turning into a lamp or vase. It looks nice to me just the way it is and the price is right. What do you think?
http://akroncanton.craigslist.org/fuo/1843422775.html
OK, I'm going to stop now and go to bed. Nite all.
#4218
Originally Posted by quilterguy27
Here's one on the flip side of the coin. I think I'd snatch this one up in a heartbeat if I wanted another machine. Billy or anyone, what do you think of this machine? Worth the price or should I ask for better pics?
http://akroncanton.craigslist.org/atq/1851717549.html
http://akroncanton.craigslist.org/atq/1851717549.html
But I am a pre 1880 snob (well not really but I lick my chops at them :mrgreen: )
So what I consider it worth and what it truly is worth may be 2 different things
#4219
On a side note. Dont you hate it when they dont post clear pictures. When I am trying to sell anything on craiglist I try to get the best picture possible. It kinda makes me wonder in the age of digital cameras are they trying to hide something
#4220
Well, OK, I couldn't resist. Here's one more. Made in Canada. I love this machine and the price seems right. Great pics. Check this one out. Now I'm going to bed.
http://akroncanton.craigslist.org/atq/1840046246.html
http://akroncanton.craigslist.org/atq/1840046246.html
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM