Vintage Sewing Machine Shop.....Come on in and sit a spell
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Just remember the machine must be cleaned first with machine oil or baby oil or what ever is you favorite method. Suggestions for cleaning on this board are very good and you should pick the one that is right for you.
Skip
Skip
I have a continuing issue with my upper tensioner on my 301. When I got it, the tensioner was DOA...spring was sprung and parts gone. I put a brand new one on, but I have to set the knob at 0 to get correct tension...above that it's pulling the bobbin thread through. I'm not confident enough to mess around with it beyond my two tries to reinstall it for better result. Any suggestions?
Go to the tfsr.org site for tension information. http://www.tfsr.org/publications/tec...achine_manual/
click on tension mechanism, and I believe it is around page 5/6 that will give you the information on tension.
If you have the instruction manual for a Singer 15-91 (which I do) there is an excellent illustration and information on disassembling and reassembling the thread tension. I doubt the tension dial on your 301 is way different from the 15's. Hope that can be of help to you!
Senior Member
Join Date: Jan 2011
Location: Northern California
Posts: 559
What is this: Blue Magic 12a TR 3 Resin Glaze - and where do you find it?
Joe, my hubby gets TR3 at an Reibe's or any auto supply store. Kathie
Joe, my hubby gets TR3 at an Reibe's or any auto supply store. Kathie
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Janice,
Go to the tfsr.org site for tension information. http://www.tfsr.org/publications/tec...achine_manual/
click on tension mechanism, and I believe it is around page 5/6 that will give you the information on tension.
If you have the instruction manual for a Singer 15-91 (which I do) there is an excellent illustration and information on disassembling and reassembling the thread tension. I doubt the tension dial on your 301 is way different from the 15's. Hope that can be of help to you!
Go to the tfsr.org site for tension information. http://www.tfsr.org/publications/tec...achine_manual/
click on tension mechanism, and I believe it is around page 5/6 that will give you the information on tension.
If you have the instruction manual for a Singer 15-91 (which I do) there is an excellent illustration and information on disassembling and reassembling the thread tension. I doubt the tension dial on your 301 is way different from the 15's. Hope that can be of help to you!
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Now that we cleared up what is japan on the old ladies, lets take it one step further. After the machines have been japaned the dacals were applied. Then a clear coat was applied to protect the decals. This clear coat is shellac(yes the same shellac used on the cabinets). Shellac when ages takes on a brown orange look that some people think is from smoking etc. It is not it is the aged shellac that is dry and rubbed off so looks shiny in spots and dull in others. So that is why you see brown areas and shiny areas after the machines is cleaned. This can be repaired and the shine will come back on the machine if you know a little about french polising which is nothing more than desolving the old shellac with new and making it bright again. It takes some time to do and practice. I have been doing this on furniture and machines for 40 + years. I hope this is not confussing to you but if you PM I will give detail instructions on how to do this. When you polish with such compounds as TR3 glazing compound you are just removing this shellac coating and making the finish look smooth again but the protection for the decals and the japan is gone. Wax will help protect the finish but will have to applied every six months or so. If you have any question please ask or PM I will be happy to answer any questions you may have. This is a method of restoration that anyone can do and it is easy.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Super Member
Join Date: Nov 2010
Location: Cadillac, MI
Posts: 6,487
My grandson showed up with a plastic toy Singer and the chainstitch doesn't work. I assume it's a hopeless situation. He just read what I wrote and told me to add that's a piece of junk.
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Glen, please do a tutorial on this. I think I want to do it on my Singer FW recently acquired. The gold powder that covered the machine was not dust it was finish - I'm pretty sure. I wiped it off with a damp rag - no oil or soap - the paint and decals aren't too bad but it does need protection.
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
That is very thoughful of you. I just purchase my first vintage machine today from a seller on craigslist gulfport. It needs a new belt. No manual, bobbin or attachments to go with it. It is a vintage singer spartan. In the area of the throat plate is reads "Made in Great Britain." On the back by the belt it states "Made in Canada." V.110-120,A.O.B, A.C. & DC. What can you tell me about this machine?
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM