What the heck?? Thread nests....
#1
Super Member
Thread Starter
Join Date: Sep 2014
Location: Victorian Sweatshop Forum
Posts: 1,271
What the heck?? Thread nests....
Using my avatar, a German Kenmore.
I am sewing along, just fine. Stitches look good. Then I hear a click and there is a thread nest underneath. I can just keep on sewing though, I don't need to stop and fix anything. This seems to happen every few feet.
What the heck? Can a tension problem "build up" and do like a release thing every few feet? I can't understand this.
Some background. I've just begun using large spools of thread and have rigged up a contraption (thanks to hints from QB members) where the large spool sits to the right of my machine. I am guessing somehow that had changed things but I'm not sure what to try and fix first.
Thanks for all help.
I am sewing along, just fine. Stitches look good. Then I hear a click and there is a thread nest underneath. I can just keep on sewing though, I don't need to stop and fix anything. This seems to happen every few feet.
What the heck? Can a tension problem "build up" and do like a release thing every few feet? I can't understand this.
Some background. I've just begun using large spools of thread and have rigged up a contraption (thanks to hints from QB members) where the large spool sits to the right of my machine. I am guessing somehow that had changed things but I'm not sure what to try and fix first.
Thanks for all help.
#2
Using my avatar, a German Kenmore.
I am sewing along, just fine. Stitches look good. Then I hear a click and there is a thread nest underneath. I can just keep on sewing though, I don't need to stop and fix anything. This seems to happen every few feet.
What the heck? Can a tension problem "build up" and do like a release thing every few feet? I can't understand this.
Some background. I've just begun using large spools of thread and have rigged up a contraption (thanks to hints from QB members) where the large spool sits to the right of my machine. I am guessing somehow that had changed things but I'm not sure what to try and fix first.
Thanks for all help.
I am sewing along, just fine. Stitches look good. Then I hear a click and there is a thread nest underneath. I can just keep on sewing though, I don't need to stop and fix anything. This seems to happen every few feet.
What the heck? Can a tension problem "build up" and do like a release thing every few feet? I can't understand this.
Some background. I've just begun using large spools of thread and have rigged up a contraption (thanks to hints from QB members) where the large spool sits to the right of my machine. I am guessing somehow that had changed things but I'm not sure what to try and fix first.
Thanks for all help.
Cones of thread need an appropriate thread stand. There's a pic of one here.
A lot of twisting would probably cause problems.
#3
Super Member
Thread Starter
Join Date: Sep 2014
Location: Victorian Sweatshop Forum
Posts: 1,271
Thanks.
Call me stubborn or annoying or whatever but I'd still like to mess around with my creation a bit longer and see if I can make it work.
So...do I want the cone of thread to sit still while the thread unravels off the top? Is that my goal?
I believe the way I had it set up, the cone was spinning around as the thread unraveled.
One issue I can see is because I have an old machine, my motor is mounted externally on the back. When I put the thread cone in the back of my machine, it was getting caught on the motor. I had to move it to the side and now I see it touches the belt. I need to get the thread up higher as it comes off the cone.
I may end up buying the store bought gizmo in the end....
Call me stubborn or annoying or whatever but I'd still like to mess around with my creation a bit longer and see if I can make it work.
So...do I want the cone of thread to sit still while the thread unravels off the top? Is that my goal?
I believe the way I had it set up, the cone was spinning around as the thread unraveled.
One issue I can see is because I have an old machine, my motor is mounted externally on the back. When I put the thread cone in the back of my machine, it was getting caught on the motor. I had to move it to the side and now I see it touches the belt. I need to get the thread up higher as it comes off the cone.
I may end up buying the store bought gizmo in the end....
Last edited by KenmoreGal2; 05-13-2015 at 05:01 AM.
#4
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
I agree with Mike. Cones are made to pull the thread off the top. You don't want them to spin. If yours is spinning there's a strong chance that's the source of your nests.
You can probably make a workable cone stand out of a piece of wood for the base and an old wire clothes hanger with a small loop in one end. It doesn't take much.
Don't make it too tall. I did on mine and the thread likes to jump out of the open thread guide on top of my 15 cone.
Just tall enough to clear the top of the machine will work fine.
Rodney
You can probably make a workable cone stand out of a piece of wood for the base and an old wire clothes hanger with a small loop in one end. It doesn't take much.
Don't make it too tall. I did on mine and the thread likes to jump out of the open thread guide on top of my 15 cone.
Just tall enough to clear the top of the machine will work fine.
Rodney
#6
I have this happen with some large spools. I've gone to winding the thread around the loop to keep some tension on it between that and the machine. Some thread just seems to like to twist no matter what.
I'm using a cone that is meant to pull from the top - most are meant to pull that way. I use the sideways holder for regular spools that are meant to unwind.
What was happening, the thread was hanging a bit between the machine and holder, and would loop, then the whole loop would get pulled through the tension, and as soon as it was on the other side - BANG - Thread nest and if it wasn't huge, it would just keep on sewing.
I've also had problems with it popping under the tension spring between the tension and thread uptake. No idea how that happens, but when that happens it will sew bad until I stop and rethread. It's not been jumping that since I added the extra loop around the hook.
You should see the thread path I need for my longarm - to keep the thread from whipping around and going where it should not - but that machine can go quite fast.
I'm using a cone that is meant to pull from the top - most are meant to pull that way. I use the sideways holder for regular spools that are meant to unwind.
What was happening, the thread was hanging a bit between the machine and holder, and would loop, then the whole loop would get pulled through the tension, and as soon as it was on the other side - BANG - Thread nest and if it wasn't huge, it would just keep on sewing.
I've also had problems with it popping under the tension spring between the tension and thread uptake. No idea how that happens, but when that happens it will sew bad until I stop and rethread. It's not been jumping that since I added the extra loop around the hook.
You should see the thread path I need for my longarm - to keep the thread from whipping around and going where it should not - but that machine can go quite fast.
#7
Here is a picture of what I'm doing. As I experiment with more threads - I'm finding that I need to keep a good tension on the thread before it goes to the tensioner, so it will feed into it properly and not pull loops or even pop out of it. This spool is relatively new - Coats and Clarks made in Mexico. And it really isn't that nice of thread . . .
This is what my longarm has to keep the thread taut before it feeds into the tensioner.
This is what my longarm has to keep the thread taut before it feeds into the tensioner.
Last edited by Macybaby; 05-13-2015 at 05:56 AM.
#8
Super Member
Thread Starter
Join Date: Sep 2014
Location: Victorian Sweatshop Forum
Posts: 1,271
Thanks for the advice. Thanks esp Macybaby for explaining the mechanics of what was happening. What you describe sounds exactly like what was happening to me.
Headed out the door but think I hit on a solution! I'll test it and post pics later. It involves a household item that I didn't quite know what to do with anyway. So I will NOT be stopping at JoAnn's today.
Headed out the door but think I hit on a solution! I'll test it and post pics later. It involves a household item that I didn't quite know what to do with anyway. So I will NOT be stopping at JoAnn's today.
#9
Super Member
Thread Starter
Join Date: Sep 2014
Location: Victorian Sweatshop Forum
Posts: 1,271
Epic Fail!!! My new "solution" was even worse than before. I even had to do your "looping" thing too Macybaby, same thing was happening to me with droopy thread. It helped slightly, but still didn't fix it.
Plus I didn't go to JoAnn's even though I was close because I thought my solution would work. Oh well....
I'll re-read all the ideas in my thread from a week or so ago about using these big cones. Perhaps there is something in there that will work for me after all. Otherwise, I'll hit JoAnn's next time I'm near and just use my plain old spools of thread until then.
Plus I didn't go to JoAnn's even though I was close because I thought my solution would work. Oh well....
I'll re-read all the ideas in my thread from a week or so ago about using these big cones. Perhaps there is something in there that will work for me after all. Otherwise, I'll hit JoAnn's next time I'm near and just use my plain old spools of thread until then.
#10
Super Member
Thread Starter
Join Date: Sep 2014
Location: Victorian Sweatshop Forum
Posts: 1,271
Ok, well this is odd. I went back to a thread I started a week or so ago about using cones of thread in DSMs.
I re-read all the suggestions and ended up trying to stick a smaller empty spool inside the cone and put it on my machine the traditional way. That seems to have worked.
So far I've run 4 pretty long rows of stitches and not one nest. (knock wood....)
What I think is odd is that the cone is still spinning, just like a regular spool of thread would, and yet now I am getting no nests.
Also - One person on one of the threads said having that much weight of the big cone will wear out the machine. Could that be - especially on an old all metal machine like mine?
I re-read all the suggestions and ended up trying to stick a smaller empty spool inside the cone and put it on my machine the traditional way. That seems to have worked.
So far I've run 4 pretty long rows of stitches and not one nest. (knock wood....)
What I think is odd is that the cone is still spinning, just like a regular spool of thread would, and yet now I am getting no nests.
Also - One person on one of the threads said having that much weight of the big cone will wear out the machine. Could that be - especially on an old all metal machine like mine?
Thread
Thread Starter
Forum
Replies
Last Post
DeniseP
Main
60
10-04-2010 08:17 PM
craftybear
Links and Resources
12
08-29-2010 09:52 AM