What model singer
#1
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 135
What model singer
I'm just getting involved in vintage machines and I picked up this one at a junk store for $10. It doesn't work but I'd like to find out what model it is and play around with it before I tactal the machine I have that works. This one is my guinea pig. The serial # is AH 174533 so it's circa 1947. Any help will be greatly appreciated.
I hate to sound dumb, but I have photos but I don't know how to post them for you guys to see. Which I'm sure would be helpful in figuring out what model machine it is
I hate to sound dumb, but I have photos but I don't know how to post them for you guys to see. Which I'm sure would be helpful in figuring out what model machine it is
#2
Super Member
Join Date: Sep 2015
Posts: 1,963
According to ISMACS it's a model 128 made in 1947. It's a nice model, lots of info on the web on it. Is it intact? If all parts are there all it usually need is oil, a bit of TLC and more oil. Electric motor or hand crank? I doubt a treadle would be used as a door stop.
Last edited by Mickey2; 10-26-2015 at 07:13 AM.
#4
Senior Member
Join Date: Feb 2012
Posts: 673
Those vibrating-shuttle Singers are terrific little (it's a 3/4 size) basic machines. Yours probably has the pebbly ("Godzilla") finish with glossy black hand wheel. Nice. Get it working properly and it'll be a handy machine to have.
#5
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 135
Manalto- that's exactly what it looks like!!!! Sounds like I should attempt to resurrect it. I'll have my husband check it with the volt meter and check the electrical cord. I'm not about getting zapped!!!! Thanks guys for the info!! Glad to know there's a lot of info on the internet about it!!!
I'll have to do a more detailed inspection of it to make sure all the parts are there.
I'll have to do a more detailed inspection of it to make sure all the parts are there.
#6
Senior Member
Join Date: Feb 2012
Posts: 673
I get an odd satisfaction from making the same quilt on a $10 machine as someone who has a $6,000 computerized plastic craptastic contraption. (Similar to when I shovel my entire driveway in less time than it takes my next-door neighbor to get his stinky snowblower started.) Once you get the hang of it, that machine will be great for piecing. It makes the most soothing sound in Sewingmachinedom.
#7
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I get an odd satisfaction from making the same quilt on a $10 machine as someone who has a $6,000 computerized plastic craptastic contraption. (Similar to when I shovel my entire driveway in less time than it takes my next-door neighbor to get his stinky snowblower started.) Once you get the hang of it, that machine will be great for piecing. It makes the most soothing sound in Sewingmachinedom.
#8
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
Same here. Some of those expensive machines are nice though. I know after another 100 years my all metal, no electronics machines will still be able to sew (as long as the next few people to own them care for them) while the ones being made today will be in a landfill somewhere. Too much plastic inside them waiting to fail even if the circuit boards and switches somehow survive.
Rodney
Rodney
#9
Super Member
Join Date: Oct 2011
Location: Wisconsin
Posts: 1,066
Thanks to Rodney and others on this board, I got my Singer 66 running and so enjoyed making pot holders yesterday. It hums along and has beautiful stitches. Not only does it sew nicely but makes a good conversation piece in my livingroom. So thankful my brother didn't take it to Goodwill. Sharon
#10
Senior Member
Join Date: Feb 2012
Posts: 673
Thanks to Rodney and others on this board, I got my Singer 66 running and so enjoyed making pot holders yesterday. It hums along and has beautiful stitches. Not only does it sew nicely but makes a good conversation piece in my livingroom. So thankful my brother didn't take it to Goodwill. Sharon
Last edited by Manalto; 10-28-2015 at 09:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
mpayne978
For Vintage & Antique Machine Enthusiasts
12
03-25-2018 06:56 PM
miriam
For Vintage & Antique Machine Enthusiasts
154
03-12-2014 07:43 AM
Rodney
For Vintage & Antique Machine Enthusiasts
18
10-24-2013 07:51 AM