What's the difference between a ....
#11
Super Member
Join Date: Oct 2013
Location: Centralia, WA, USA
Posts: 4,890
I had to pass on one identical to it at a church sale last summer. I didn't have the $50 they were asking at the time. That and my wife probably would have killed me. Another machine I regret not getting.
Rodney
Rodney
#12
Senior Member
Join Date: May 2012
Posts: 911
that guy with the vid says these where only made in japan and started in 1956,, my manual last copyright date is 1936. I don't even know where 15-91's came out. This manual was in freds trailer along with 4 15=91's
anyway thats the same stand and control system as they used on there 2100's, less the knee lifter. it's cool how the switch parts around to make different models
today they would 3d draft, plastic inject, then cnc mill every part so that nothing would interchange
[ATTACH=CONFIG]508102[/ATTACH]
anyway thats the same stand and control system as they used on there 2100's, less the knee lifter. it's cool how the switch parts around to make different models
today they would 3d draft, plastic inject, then cnc mill every part so that nothing would interchange
[ATTACH=CONFIG]508102[/ATTACH]
#13
That can't be true. That machine says "1200-" not 1200U. The "-" means it was made in the U.S. (where all potted machines were made). It can easily take a more serious 1/4 HP universal motor.
#17
Senior Member
Join Date: Nov 2014
Location: Sacramento County, CA
Posts: 302
Well, I got the info I posted from ISMACS, so if it's wrong it's their fault ....
My wife looked at that machine and said: "That's like the machines I used at Barrows years ago." She said it would be a good quilting machine. Unfortunately it's in CA and we're not ...
I told her she could use my 201-2 ... same thing basically. She didn't appreciate my humor.
Joe
My wife looked at that machine and said: "That's like the machines I used at Barrows years ago." She said it would be a good quilting machine. Unfortunately it's in CA and we're not ...
I told her she could use my 201-2 ... same thing basically. She didn't appreciate my humor.
Joe
The potted geared machines can take the 1/4HP motor? I thought the point of all the people wanting to rewire the motors is that they cannot take off the potted motor that is already there.
#18
Senior Member
Join Date: May 2012
Posts: 911
a 1/4 motor would be a standard clutch industrial motor, which defect the propose of that machine set up
singer did have 110v and 220V in the potted motor, on order you could get 34V Dc or 50V AC
the potted motor unit will unscrew
singer did have 110v and 220V in the potted motor, on order you could get 34V Dc or 50V AC
the potted motor unit will unscrew
#19
The industrial universal motors attach like clutch motors. Advantage of them is they only draw current when in use.
Can you show me a 220V potted motor? I have never seen one.
#20
Senior Member
Join Date: May 2012
Posts: 911
It's a sit down table.. presser foot lifter hangs right about even with your right knee.. it shows in the photo, look for a round rod,
Thread
Thread Starter
Forum
Replies
Last Post
blzzrdqueen
Main
4
04-17-2009 12:47 PM