string quilt
#1
Member
Thread Starter
Join Date: May 2014
Location: Conway, AR
Posts: 10
string quilt
Hello fellow quilters, I am currently working on a string quilt using muslin foundation. I've been wondering how to do the border since it will be only one layer and not double as the blocks are. Should anything be added so the border will be the same weight as the main part of the quilt. The border will not be very wide since the blocks will measure approx. 80x90. This is my first foundation quilting project. I have searched the internet and have not found anything referring to adding a border to foundation blocks.
#2
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
What kind of border are you planning to add? I don't think I've ever seen a border added to a string quilt before. How wide will it be? Will it be pieced (like blocks of some sort)? Or solid, strips of fabric? If it is just solid strips and fairly narrow (like only a couple inches) you probably won't need a foundation.... But wider you might want one... Lots of variables, depending on the type/size of border.
#3
Power Poster
Join Date: Jul 2010
Location: McLoud, OK
Posts: 13,264
I have a string quilt on my avatar pieced on muslin, then a piano key border pieced on adding machine tape. I removed the paper, of course. The sashing and borders in between are single layers...not a problem.
#4
If you think about it, any quilt has areas where there is only one layer of fabric, other areas where there are 2, 3, 4 layers, even more because of seams allowances. Once the quilt is quilted these areas seldom matter. I wouldn't worry about it.
#7
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,491
Once it is sandwiched, I don't think it will make much difference. I did however want to have my sashing to have the same feel as my foundation pieced blocks on a top I did. I just cut 1 inch sashing and sewing 1/4 inch on both side seams brings the visible sashing down to 1/2 inch and the seam allowances add the extra thickness underneath.
P.S. It also gave the thicker edges of the foundation blocks somewhere to go as I pressed them all into the sashing.
P.S. It also gave the thicker edges of the foundation blocks somewhere to go as I pressed them all into the sashing.
Last edited by Tartan; 07-17-2014 at 09:17 AM.
#8
Member
Thread Starter
Join Date: May 2014
Location: Conway, AR
Posts: 10
Once it is sandwiched, I don't think it will make much difference. I did however want to have my sashing to have the same feel as my foundation pieced blocks on a top I did. I just cut 1 inch sashing and sewing 1/4 inch on both side seams brings the visible sashing down to 1/2 inch and the seam allowances add the extra thickness underneath.
P.S. It also gave the thicker edges of the foundation blocks somewhere to go as I pressed them all into the sashing.
P.S. It also gave the thicker edges of the foundation blocks somewhere to go as I pressed them all into the sashing.
#9
Sounds wonderful! I love black & white quilts and the lime will surely make the quilt *sing*!
My string quilts I've made on paper foundations which were removed before sandwiching and quilting.
I don't think the thickness will be an issue once your quilt is together because, as you mentioned, your seam allowances will take care it.
Post pictures when complete...the quilt sounds wonderful.
My string quilts I've made on paper foundations which were removed before sandwiching and quilting.
I don't think the thickness will be an issue once your quilt is together because, as you mentioned, your seam allowances will take care it.
Post pictures when complete...the quilt sounds wonderful.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
12
07-11-2011 06:54 PM
craftybear
Links and Resources
8
05-13-2011 09:34 AM