Standard Rotary bobbin case
#1
Member
Thread Starter
Join Date: Jan 2022
Location: Del Norte co.
Posts: 1
Standard Rotary bobbin case
Hi there, I have a Standard Rotary treadle machine and I looking for a bobbin case for it. The original part number is 3626BA. I would love to get this up and running. Any help would be appreciated. Thanks! I have a picture from the original manual but cant seem to figure out how to post it here.
#2
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 839
It will be tough to help without a picture, here are Ourworkbench's AKA Janey instructions on posting pictures.
We like pictures. In order to post pictures on Quilting Board, you will probably need to reduce or compress the picture to a file size that is smaller than 2MB. How to post images can be found at https://www.quiltingboard.com/attach...020-01-17-.pdf
Don't forget to scroll over to the far right to find and click on the "Upload" button.
I have found that only the big red "Reply" button or "Quote" work to give me the paper clip icon to work for adding pictures.
https://www.quiltingboard.com/attach...p-location.jpg
Some additional info regarding reducing images at post #4 and images for the scroll and upload button can be found at #5 of quilt block ID?
Another way to post pictures can be found at 2021/2022, 2.5” Birthday Swap
Or simply - Make sure pictures are smaller than 2MB
Click on red "Reply" button
Click on the paper clip icon
Click browse - choose picture/s. (only 5 allowed per post)
Once they show up as being loaded, Scroll over to the right side and click on "Upload"
After the pictures show up as being attached, you can close that window and go back to the screen to finish posting your post.
We like pictures. In order to post pictures on Quilting Board, you will probably need to reduce or compress the picture to a file size that is smaller than 2MB. How to post images can be found at https://www.quiltingboard.com/attach...020-01-17-.pdf
Don't forget to scroll over to the far right to find and click on the "Upload" button.
I have found that only the big red "Reply" button or "Quote" work to give me the paper clip icon to work for adding pictures.
https://www.quiltingboard.com/attach...p-location.jpg
Some additional info regarding reducing images at post #4 and images for the scroll and upload button can be found at #5 of quilt block ID?
Another way to post pictures can be found at 2021/2022, 2.5” Birthday Swap
Or simply - Make sure pictures are smaller than 2MB
Click on red "Reply" button
Click on the paper clip icon
Click browse - choose picture/s. (only 5 allowed per post)
Once they show up as being loaded, Scroll over to the right side and click on "Upload"
After the pictures show up as being attached, you can close that window and go back to the screen to finish posting your post.
#3
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 839
This may be a long shot, but in a local thrift store there was a machine badged "Standard", leaf tension, but a rotary machine as opposed to a vibrating shuttle. It was a "treadle only" machine, and only $3, but I didn't buy it as it was missing the bobbin case. I looked on my Boye needle dispenser to see what needle a Standard used and it said Boye 2 1/2, which is the CC1221, which goes with the New Home/Free Westinghouse rotaries I have owned:
https://www.quiltingboard.com/vbulle...2-t312039.html
And this machine also
https://www.quiltingboard.com/vbulle...t-t314593.html
So I was going to buy the machine but it was gone when I returned to the store. My plan was to try a bobbin case from a machine I have that uses the Boye 2 1/2 (CC1221) needle.
Needlebar.org does not have a lot of information on Standard
http://needlebar.org/nbwiki/index.php?title=Standard
but it does show multiple bobbins for the rotary, so as I said, my plan may have been a long shot.
https://www.quiltingboard.com/vbulle...2-t312039.html
And this machine also
https://www.quiltingboard.com/vbulle...t-t314593.html
So I was going to buy the machine but it was gone when I returned to the store. My plan was to try a bobbin case from a machine I have that uses the Boye 2 1/2 (CC1221) needle.
Needlebar.org does not have a lot of information on Standard
http://needlebar.org/nbwiki/index.php?title=Standard
but it does show multiple bobbins for the rotary, so as I said, my plan may have been a long shot.